Nexo
PS-10 Loudspeaker system
VERSATILE, COMPACT, FULL RANGE
Tailored
for a wide range of touring and installed sound reinforcement applications, PS
Series loudspeakers use a unique cabinet design and rotatable constant directivity
asymmetrical dispersion horn to provide both PA and stage monitor functions. The
PS10 and LS500 are extremely light and compact. NEXO's unique Active Fullrange
Processing enables a 2-way passive 8O design to deliver bi-amped performance using
just one amplifier channel for less money, space and complexity.
Like
all NEXO products, the PS10 Loudspeaker and optional LS500 Subwoofer are designed
to work with advanced electronic processors, guaranteeing consistent performance
and reliability of the highest standard.
SYSTEM
APPLICATIONS
Near-field portable or installed PA for clubs, A/V, Houses of Worship, Theater,
Broadcast, etc.
High quality stage monitoring for clubs, A/V, theater, broadcast, etc.
Fill-in system in conjunction with larger NEXO systems.
PS-10:
FOUNDATION of PS SERIES
The PS10 Loudspeaker can be safely driven with over 500W of amplifier power, yet
it is only half the weight and volume of common trapezoidal systems. The dispersion,
architecture and weight balance of the PS10 Loudspeaker are designed to provide
both exceptional PA and stage monitor performance without compromise.
This flexibility is realized by a proprietary constant directivity asymmetrical
dispersion horn, easily rotated in four positions by the user. The PS10 horn’s
unique progressive horizontal progressive horizontal (50° to 100°) and
vertical (+25°, -30°) dispersion, couples with NEXO's unique Active Fullrange
Processing to enable this 2-way passive 8O design to deliver bi-amped type performance
from a single amplifier channel.
View Datasheet on
PS-10
LS500: HIGH OUTPUT, LOW WEIGHT
The
LS500 SubBass extends the usable range of the PS10 Loudspeaker to 38Hz, providing
134dB Peak output in an extremely compact, light weight package.
The PS10 TDcontroller's integral sub section and combined signal (PS10 and LS500)
Speakon wiring ensure cost effective and simple system implementation. One LS500
is typically used with 2x PS10 loudspeakers. Additional units may be used for
an enhanced effect.
View Datasheet on
LS500
PS-10a: PRECISION
PROCESSING
The
PS10AMP is a dedicated amplifier that allows the PS10 Loudspeaker and optional
LS500 Subwoofer to achieve exceptional performance from such compact packages.
The integrated PS10 TDcontroller provides crossover, sensed amplifier control
and system equalisation optimised for the PS10 and LS500. Like all NEXO processors,
the PS10AMP provides precision dynamic, voice coil temperature and diaphragm displacement
protection through the use of selective Voltage Controlled Equalisers (VCEQs),
reducing levels only at frequencies when and where necessary.
The
PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out.
The PS10AMP Configuration switch automatically configures the unit for 2-channel
mode (LSub Off), where the PS10AMP drives 2 to 4 PS10 Loudspeakers in stereo (2x
850Watts/4O) or 3-channel mode (Lsub On), where the PS10 AMP drives 2x PS10 Loudspeakers
in stereo (2x 430Watts/8O) and 1x LS500 Subwoofer (850W/4O) with a summed mono
signal of the L+R input signals. Since the Configuration switch also rewires the
output connectors, and displays PS10AMP mode status with LED indicators, the PS10AMP
minimises installation cost and complexity while ensuring faultless performance.
View Datasheet on
PS-10a Amplifier
